INSTRUCTIONS
INFLATION
1. Connect vehicle power adapter plug to a DC 12V power source.
2. Connect one end of the hose to the INFLATE port of the pump and the opposite end of the hose firmly
into the open valve of the product you wish to inflate.
3. Turn the pressure switch to the desired pressure setting, then press the ON button to begin inflation.
4. Once the pressure reaches the desired pressure setting the pump will stop automatically.
5. Detach the hose from the valve and tightly close the valve cap.
NOTE:
The pump operates in 2 stages and will produce a distinct sound as your inflatable reaches higher
pressures. This is normal and does not indicate a flaw or damage to your pump.
DEFLATION
NOTE:
The deflation setting is not intended for use with inflatable tents. Please refer to your tent’s
instructions for deflation.
1. Connect one end of the hose to the DEFLATE port of the pump and the opposite end of the hose
firmly into the open valve of the product you wish to deflate.
2. Turn the pressure switch to the ‘1’ position and then press the ON button to begin deflation.
3. Once deflation is complete, press the OFF button and turn the pressure switch to the ‘0’ position.
NOTE:
You must manually press the OFF button to stop deflation.
4. Detach the hose from the valve and tightly close the valve cap.
Attention!
IMPORTANT
- Power supply must be
12 Volt DC
.
- This pump is designed to inflate items such as
air tents, SUP boards
and
inflatable boats
. It is not designed for continuous use.
-
DO NOT
operate the air pump for
more than 20 minutes
at a time.
- Keep the air pump out of reach of children.
-
DO NOT
obstruct the inflation/deflation ports and keep them
ventilated at all times.
- To disconnect, turn all controls to the OFF position, then remove plug
from outlet.
- Return the pump, DC adapter and nozzles to package when not in use.
- When the
pump is not in use
, it is recommended to always turn the
pressure switch knob to number
‘0’
position.
ON Switch
OFF Switch
Inflation port
Deflation port
WARNING
- Carefully follow the instructions on the inflatable item when inflating. Never exceed the
recommended pressure, otherwise, serious injury might be caused by the item bursting.
- To reduce the risk of electric shock, do not expose to rain or use around water.
- Always store in a cool dry area, away from heat and moisture.
- Never attempt to disassemble or repair. If the power cord is damaged, it must be replaced by
the manufacturer, its service agent or similarly qualified person in order to avoid hazard.
- This product must not be disposed of with domestic waste. Check your local regulations for
proper disposal instructions.
- This air pump is not intended for use by young children or infirm persons unless they have
been adequately supervised to ensure that they can use the air pump safely.
- Do not attempt to put any objects into the inflation or deflation connector at any time. Keep
the inflation/deflation ports clear of sand, small rocks, etc, when using the pump.
- Never look inside or point the inflation/deflation port towards your eyes when the pump is in
use.
- Use this unit only for its intended use as described in these instructions. Do not use
attachments not recommended by the manufacturer.
- Never leave the pump unattended while in use. Always unplug the pump when not in use.
- Keep the cord away from heated surfaces.
- Do not tamper with the HOSE near the INFLATE port while operating.
