2.
8.
Peg out all peg points and guy
ropes, pegging at a 45
o
angle.
7.
Connect the fly to
the inner by
connecting the side
release buckles at
each end.
1x
3.
1.
Clear your site making sure there are no
sharp objects where you are going to
pitch your tent. Try to get a site that is as
flat as possible. Stretch out the inner tent.
6.
Throw the flysheet over the inner
and fasten the Velcro ties found on
the inside of the fly around the
pole line.
5.
Peg out all 6 peg points on the
inner tent ensuring that the floor of
the inner sits flat and level. Pegs
should be hit in at a 45 angle.
a
o
Insert the pole ends in to the eyelets
found at each end of the inner.
4.
Connect the inner to the frame by
connecting the c-clips that run along
the centre seam of the inner tent.
Assemble the pole section. Ensure the
pole does not snap together. It is
important that the poles are fully inserted
into the ferrules. If the ferrules do not
connect together correctly they can cause
damage when tensioned.
