25
FACE, NECK, & DÉCOLLÉTE RF PROTOCOL
Apply conductive gel on the cleansed skin.
Always start at a low RF intensity to prevent burns, and adjust intensity increasingly during
treatment if needed.
Slowly move the hand piece on the skin using conductive gel.
Move the applicator in slow, small circular motions moving up and out towards the
periphery in the direction of natural lymphatic flow.
Work in one area (half of the face, half of the neck, forehead, etc) for 5-10 minutes.
Add LED, Ultrasound or Cold therapy for excellent finishing step. End the facial with SPF
and moisturizer.
Prepare the client for the session:
Take off all jewelry
Remove makeup and clean the skin
Optional:
Perform dermabrasion or ultrasonic skin peeling for a deep cleanse
Note: during treatment, all electrodes on the handpiece must contact the skin tightly and all
at once. Otherwise, burning on the skin may occur.
The higher the intensity, the faster the handpiece must be moved.
Ask your client to inform you if he or she feels any strong discomfort. Normally, patients
experience a comfortable warm sensation throughout treatment.
Duration of Bipolar or Tripolar RF Therapy should be about 25-45 minutes, depending on the size
and condition of the treated zone.
Recommended frequency of RF Therapy is 5-15 sessions at 1 session per every 5-15 days.
