ZELTIQ CoolSculpting System, Руководство пользователя

Страница: 33 / 86

System Overview Applicators
User Manual 33
Applicators
CAUTION: Always use foam borders, gelpads, gel, liners, and securement
systems with the applicator as instructed in the directions for use.
The applicator delivers controlled cooling and warming to the treatment site; the vacuum applicator can
deliver optional massage to the treatment site.
The applicator consists of the applicator connector, the applicator cable, and the applicator head. The
applicator is used with supplies provided by ZELTIQ.
For information about using the applicator in a treatment, see:
•
Attach the Applicator to the Control Unit on page 38
•
Surface Applicator Treatment on page 43
•
Vacuum Applicator Treatment on page 42
•
CoolAdvantage Directions for Use
•
CoolMini Directions for Use
The applicators are designed to treat most body parts. The table provides general suggestions for treatment
sites. However, clinicians should consider all physical aspects of the area to be treated and use the applicator
that will fit best for each patient.
ZELTIQ defines a specific combination of treatment temperature and duration for each profile. Typically, a
colder treatment temperature is paired with a shorter treatment duration.
Applicator Total
Cooling Area
(cm
2
)
Treatment Sites Profile
Temp.
Range
Profile
Duration
Range
Default
Massage
Settings
Default
Vacuum
Setting
Pre-
treatment
Skin Care
Post-
treatment
Care Option
CoolCore
117 Contoured areas
with pinchable
fat, such as the
upper and lower
abdomen, and
banana roll Down to -
15

C
Up to 60
minutes (Optional)
50-65-50
50 Skin wipes Manual
massage
Co
130 Sharply
contoured areas
with pinchable
fat, such as the
flanks, back fat,
and bra fat Down to -
15

C
Up to 60
minutes (Optional)
50-65-50
50 Skin wipes Manual
massage
CoolMax
343
Large contoured
areas with
pinchable fat,
such as the
lower abdomen Down to -
15

C
Up to 60
minutes
(Optional)
50-65-50
50 Skin wipes
Manual
massage