Zelmer ZWP5215AX, Руководство пользователя

Страница: 37 / 40

37
WP-001_v02
diameter of 120 mm and appropriate duct clamps which are
to be purchased in installation materials supply stores. The
installation should be performed by a qualified fitter.
Setting the odor absorber operation mode
In this option, filtered air is fed back into the room through
the front openings of the hood. To set the odour absorber
mode, install the activated carbon filter and switch the lever
located at the motor of the unit from upper to lower position
(Fig. C ) .
The speed of the fan
The lowest and medium speed settings are used in normal
conditions and low cooking fume intensity. The highest
speed setting should be used only in case of an intense level
of cooking fumes e.g. during frying or grilling.
Operation
Control panel
The cooker hood can be controlled using an integrated
switch.
0 – motor off,
1 – first operation speed,
2 – second operation speed,
3 – third operation speed,
– light on/off.
This adjustment allows to set the optimal fan speed for the
user’s needs with a minimal noise level.
Cleaning and maintenance
Maintenance
Regular cleaning and maintenance will guarantee a good
and failure-free operation of the cooker hood and will prolong
its useful life. Make sure the aluminum filters and the active-
coal filters are replaced according to the manufacturer’s
recommendations.
Anti-grease aluminum filters
Cleaning
In case of a normal operation of the cooker hood, the
aluminum anti-grease filters should be cleaned every two
months in a dishwasher or manually with the use of a mild
detergent or liquid soap.
Replacement
To dismantle the filters:
●
Remove the lower cover by releasing the catch.
●
Take out the aluminum anti-grease filter.
Coal filter (available at sales network)
Operation
Coal filters are used only when the cooker hood is not
connected to the ventilation duct.
D
E
Active-coal filters can absorb odors until they are saturated.
Active-coal filters cannot be washed or regenerated; they
should be replaced at least every two months or more often if
the cooker hood is intensively used.
Replacement
●
Remove the aluminum anti-grease filter.
●
Install the carbon filter from the inner side of the
aluminum anti-grease filter.
●
Install the aluminum anti-grease filter together with
the carbon filter in the body of the ventilation hood in
such a way that the carbon filter is situated inside the
ventilation hood.
Lighting
Lighting system consists a light bulb with a power of 28 W.
In order to replace a damaged light bulb:
●
Unplug the appliance.
●
Remove the aluminum filter from the cooker hood
housing.
●
Replace the damaged light bulb using a cloth or paper.
●
Reinstall the aluminum filter.
Cleaning
During the normal cleaning process do not:
●
Use soaked cloths, sponges or running water.
●
Use solvents or alcohol, as they may tarnish the
lacquered surfaces.
●
Use corrosive substances, especially for cleaning
stainless steel surfaces.
●
Use a hard, rough cloth.
It is recommended to use a damp cloth and neutral cleaning
agents.
Ecology – environment protection
Each user can protect the natural environment. It is neither
difficult nor expensive.
In order to do it: put the cardboard packing
into recycling paper container; put the
polyethylene (PE) bags into container for
plastic.
When worn out, dispose the appliance
to particular disposal centre, because of
the dangerous elements of this appliance,
which can be hazardous for natural environment.
Do not dispose into the domestic waste disposal!!!
The manufacturer/importer does not accept any liability for any
damages resulting from unintended use or improper handling.
The manufacturer/importer reserves his rights to modify the product
any time in order to adjust it to law regulations, norms, directives,
or due to construction, trade, aesthetic or other reasons, without
notifying in advance.