Zelmer ZCM4822X, Руководство пользователя

Страница: 38 / 41

39
CM4822-001_v02
Information shows on the screen Causes Solutions
If the water drip tray is full, any function
of making beverage will be out of
service.
Take the drip tray out, empty the waste
water in the drip tray and reinstall it to
the machine.
If the coffee grounds container is full,
any function of making beverage will be
out of service.
Take the coffee grounds container out,
empty the coffee grounds container and
reinstall it.
If water in the water tank is used up, any
function of making beverage will be out
of service.
Fill the water tank with water.
If coffee beans in the bean container are
used up, function of making coffee will
be out of service.
Add beans into bean container, and
press the rotary button to release.
There is not enough coffee powder in
the powder container.
Next time when making coffee with
coffee powder, please put a full spoon of
powder.
The drip tray is not installed correctly;
any function is out of service.
Install the drip tray correctly.
The water in the pipe inside the machine
is not enough; any function is out of
service.
Press the rotary button to release, to run
the water replenishing system.
Temperature of the machine is too high,
the machine cannot be used.
Power off the main power, and use it
1 hour later.
Temperature of the machine is too low,
the machine cannot be used.
Increase environmental temperature
to above 10°C.
The coffee machine failures, may not be
able to be used.
1. Power off, restarting up;
2. If still unresolved, please pull out
the plug. Contact with customer sevice
center.
DISPLAY INFORMATION
This chapter will instruct you the information shows on the
screen and the solutions.