Zelmer Galaxy 2, Руководство пользователя

Страница: 46 / 50

50
Dear Customers!
Please read this instruction manual carefully. Pay special
attention to important safety instructions. Keep this User’s
Guide for future reference.
Important safety instructions
The vacuum cleaner is for household use only.
●
Connect the vacuum cleaner only to a 220-240 V mains
●
supply equipped with a 16 A fuse.
Do not unplug by pulling on cord.
●
Do not operate the appliance if the cord, the housing or
●
the handle is visibly damaged. In such a case, return the
appliance to a service center.
If the supply cord is damaged, it must be replaced by
the manufacturer, a service agent or a qualified person
in order to avoid a hazard.
The appliance can only be repaired by qualified service
personnel. Improper servicing may cause a serious
hazard to the user. In case of defects please contact
a qualified service center.
Do not run the vacuum cleaner or the brushes over the
●
cord, it may cause damage to the cord insulation.
Always unplug the appliance before cleaning,
●
assembling or dismantling.
Switch off the appliance before changing attachments
●
or before contact with movable parts.
Do not vacuum without the dust container, filters or in
●
case of their failure.
Do not use the vacuum cleaner to clean people or
●
animals, pay special attention to keep the nozzles away
from eyes and ears.
Do not pick up: matches, cigarette butts, hot ash. Avoid
●
picking up sharp objects.
Check the suction hose, the tubes and the nozzles –
●
remove the dirt from the inside.
Do not vacuum fine dust such as: flour, cement, gypsum,
●
toners for printers and copy machines etc.
Operate the appliance only in indoor spaces and vacuum
●
only dry surfaces. Before vacuuming dry the carpets that
were wet cleaned.
Do not under no circumstances ever cover the air holes
●
on the upper part of the housing during vacuuming.
In this way you cover the escape holes in the outlet filter
cover. The accumulation of hot air may lead to engine
overheating, and consequently its failure or deformation
of plastic parts.
This appliance is not intended for use by persons
●
(including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction
concerning the use of the appliance by a person
responsible for their safety.
Children should be supervised to ensure that they do not
●
play with the appliance.
EN
B
Technical parameters
The type of the vacuum cleaner and the technical parameters
are indicated on the rating label. Mains protection 16 A.
Does not cause interferences with audio/video devices.
Does not require grounding
.
ZELMER vacuum cleaners meet the requirements of the
applicable norms.
The appliance is in conformity with the requirements of the
directives:
Low voltage appliance (LVD) – 2006/95/EC.
–
Electromagnetic compatibility (EMC) – 2004/108/EC.
–
Noise level: 85 dB/A.
The appliance was marked by a CE sign on the rating label.
Appliance elements
1 Outlet filter cover
2 Combination brush fastening
3 Plug and cord
4 Cord rewind button
5 Suction power regulation control
6 CYKLON dust container full indicator
7 ON/OFF button
8 CYKLON dust container fastening
9 Handle
10 Suction hose
11 Telescopic suction tube with a fastening hook
12 Outlet filter (installed in the vacuum cleaner)
13 Outlet filter frame (installed in the vacuum cleaner)
14 Basic HEPA filter (installed in the vacuum cleaner)
15 Foam filter (installed in the vacuum cleaner)
16 “CYKLON” dust container (part of the removable segment
of the vacuum cleaner)
17 Inlet filter cone (installed in the vacuum cleaner)
18 Switchable combination brush
19 Crevice nozzle
20 Small brush
21 Small nozzle
22 Parquet brush “BNB” (additional equipment – may be
bought in retail centers)
Preparing the vacuum cleaner
for operation
1 Press the side button on the end of the suction hose.
2 Place the end of the suction hose in the vacuum cleaner.
You should hear a distinctive click, if you do it right.
3 Attach the other end of the hose (the handle) to the
suction tube.
4
Adjust the length of the telescopic suction tube by sliding
the slider according to the arrow and pull out/ pull the tube
together.
A