Zelmer CM1001D, Руководство пользователя

Страница: 109 / 120

109
CM1001-001_v01
5 Insert the fi lter holder in the appliance.
6
Place the permanent nylon fi lter or a paper fi lter in the
fi lter holder.
7 Close the lid.
8 Make sure that the jug lid is in place. Put the empty jug
on the hotplate.
9
Pull the power cord out of the storage compartment
at the back of the appliance and insert the plug into a wall
socket.
The power cord may be adjusted to the required
length.
• To increase the length of the cord, take
hold of the cord (do not grasp the plug) and
gently pull it down and than all the way out
until you feel resistance.
• To reduce the cord, push excess cord into
the storage compartment at the back of the
appliance. After adjusting the length, lock
the cord by pulling it all the way up into the
cut-out section of the housing.
10 For the fi rst use, operate the coffee maker with water
only, following the brewing instructions described below in
section BREWING COFFEE.
This process will allow you to remove dust
and debris generated during production and
assembly of your appliance.