Zelmer 281, Руководство пользователя, Страница: 66 / 72

69
Dear Clients!
We kindly ask you to read carefully the operation manual.
We call your special attention to safety precautions. Keep
this operation manual for future reference.
Important safety precautions
Plug the mixer to AC mains supply 230 V only.
●
Do not unplug by pulling the cord.
●
Do not start up the device, with a visibly damaged cord
●
or casing.
When the supplying cord is damaged it must be replaced
by a qualified service agent in order to avoid hazard.
The appliance can be refurbished by trained staff only.
Improper refurbishment can cause the serious hazard to
the user. In case of any defects occurrence, contact the
qualified service agent immediately.
Do not take out working elements from the bowl, when
●
mixer is on.
Do not touch the rotating equipment with your hands,
●
mixing adapter and mixing cup blades are especially
dangerous. They are very sharp!
After operation unplug the Power cord and wind on the
●
mixer motor part.
Do not expose the mixer and its equipment to the
●
temperature above 60°C. You can damage your mixer.
Switch the device off before changing equipment or
●
approaching rotating parts.
Always unplug the power cord before cleaning.
●
Keep special caution during operation in presence of
●
children.
Do not leave the appliance unattended during operation.
●
Do not allow children into any contact with the appliance.
People (including children), who because of their
●
physical, sensory or intellectual capabilities or their
inexperience or lack of knowledge are unable to use the
appliance safely, should not use this appliance unless
under supervision or instructed to do so by a responsible
person. Do not leave the appliance unattended during
operation.
Children should be supervised to ensure that do not play
●
with the appliance.
Do not immerse the mixer motor in water, nor clean it
●
under running water.
Do not clean the equipment when assembled on the
●
motor.
Do not clean the casing with aggressive detergents, such
●
as emulsion, milk, paste, etc. They can remove the graphic
symbols such as: scales, labels, caution signs, etc.
Do not wash metal parts in a dishwasher. Aggressive
●
cleaning agents used in such machines cause that
a/m parts get darker. Clean them manually with
traditional washing up liquids.
Do not use mixing adapter without immersing it in
●
products, in case of liquids, their level should not be
higher then the half of adapter height.
Be careful not to flood the inner of mixing adapter casing
●
with water – after assembling on the motor part, the
motor can get flooded.
Do not use the mixer with empty mixing cup.
●
Be careful not to flood the bottom space of mixing cup,
●
containing clutch - after assembling on the motor part,
the motor can get flooded.
Do not put simultaneously the mixer and whisk with
●
toothed bar into the motor socket. In the moment of
start-up the mixer shall get damaged.
Do not use the mixing adapter nor the mixing cup longer
●
than 3 min., whereas the mixers and whisks not longer
than 10 min
Put the mixer and whisk with toothed bar into the motor
●
socket marked with a star.
The manufacturer cannot accept any liability for damage to
●
the oven or personal injury resulting from improper usage.
Due to safety reasons, the products can only be blended
●
in the mixing cup when the lid is properly attached to
the cup. It is forbidden to insert any items to the inside
of the cup such as: spoons, spatulas, etc. It may lead
to damage to the mixer or breaking of the elements
inside the cup which may directly enter the product being
blended and this in turn poses a threat to the health or
even life.
Technical data
Technical parameters are quoted at product nameplate.
Permitted motor operation time:
with mixers, whisks 10 min.
–
with mixing adapter or mixing cup 3 min.
–
Interval time before next operation (min.) 20 min.
Noise caused by the device (L
WA
):
with mixers, whisks, mixing adapter,
–
on the stand 80 dB/A
with mixing cup (mixer 381) 84 dB/A
–
The mixers are produced in II insulation class, they don’t
need grounding.
ZELMER mixers meet current norms requirements.
The devices meet the requirements of the directives:
Low Voltage Device (LVD) – 2006/95/EC.
–
Electromagnetic compatibility (EMC) – 2004/108/EC.
–
The product is marked with CE on the name plate.
Appliance elements (Fig. A)
1 Mixer motor
2 Pusher button
3 Switch lever
4 Turbo button
5 Whisks or mixers sockets
6 Mixing adapter hole
7 Handle insert
8 Mixers: left/right with toothed bar
EN