44
Description and outline
The stand fan is equipped with three airflow speeds, possibility of setting airflow direction in vertical
position and rotating head with fluent oscillation. Low noise level, low power consumption, safety and
effective airflow are the features of this fan.
Fan parts:
1. Guard assembling bolt.
2. Front guard.
3. Propeller.
4. Rear guard.
5. Nut.
6. Rotating speed adjusting knob.
7. Oscillation rod.
8. Motor casing.
9. Supplying cord.
10. Head setting knob.
11. Bolt connecting the fan motor with the stand.
12. Narrow area.
13. Nut.
14. Height adjusting ring.
15. Stand.
16. Base.
17. Bolt connecting base with stand.
Fan casing assembling
The purchased product is disassembled. Before usage assemble it carefully according to the following
description.
1. Remove the fan from the packaging. Disconnect the front
(2)
and rear guard
(4)
, if they are assembled.
2. Unscrew four fixing bolts from the motor casing
(8)
, lift and fit the rear guard
(4)
(handle up) with four thread holes at
the motor casing
(8)
. Insert four fixing bolts and screw them tight to the Motor casing
(8)
.
3. Release the bolt fastening the propeller
(3)
and insert the propeller
(3)
on the motor shaft,
so, that the fastening
bolt is on the level of the hole in the motor shaft
and screw the bolt in the hole in motor shaft, in order to settle the
propeller. Make sure, that the propeller does not touch the guard and is properly assembled.
4. Assemble the front guard
(2)
with the rear guard
(4)
screwing the bolt fastening the guard
(1)
with nut
(5)
and lock the
lockers fastening rear guard
(4)
with front guard
(2)
.
Содержание 24Z014
Страница 47: ......
Страница 48: ...GW24 010 ...