IDENTIFY INFRARED RECEIVER/TRANSMITTER
IR Emitter/Receiver Pin Out
A
Ground
B
IR Signal
C
5V
IR Receiver
IR Emitter
A B C
TECHNICAL
A
IR Activity Indicator
B
IR Emitter (TX)
C
IR Receiver (RX)
D
RS232 Jack Port
Adapter not included
E
HDBaseT Input
F
HDMI Output
G
Ethernet x2
A
IR Activity Indicator
B
IR Emitter (TX)
C
IR Receiver (RX)
RS232 Jack Port
Adapter not included
E
48V Power Input
F
HDBaseT Out
G
PoE Indicator
H
HDMI In
I
Ethernet
SoloCAT Ultra 100 Receiver (RX)
SoloCAT Ultra 100 Transmitter (TX)
* The IR Emitter is to
be mounted with the
sticky pad horizontal
and the Receiver
bud vertical.
C
C
A
A
B
B
E
E
F
F
G
G H
I
INSTALLATION
1
Connect a single CAT5e/6/7 cable between the Receiver and
Transmitter using the HDBaseT ports
2
Connect a HDMI cable
*
between the Transmitter’s HDMI Input and
the source device (i.e. a blu-ray player)
3
Connect a HDMI cable
*
between the Receiver’s HDMI Output and
the receiving device (i.e. a LCD TV)
4
Connect the supplied IR buds to the Transmitter and the Receiver
(Please refer to the diagram to identify the IR Emitter and IR Receiver)
The IR Emitter is to be placed on the infrared sensor of the source
device. The IR Receiver is to be placed on the TV edge using the
attached sticky pad.
5
Connect the supplied power supply to the Transmitter
6
Check the LEDs on the HDBaseT ports of the Receiver and
Transmitter to ensure correct installation and connection:
The Yellow LED will illuminate when connected to a video link
The Green LED will illuminate when the device is connected to the
power supply
7
Check the IR activity on the IR Indicator LEDs (A):
The Reciever’s LED will flash Green when IR signals are being
received. The Transmitter’s LED will flash Red when IR signals are
being sent
* HDMI cables are not supplied with this extender set
D
D
D
