Zektor CVS4 Скачать руководство пользователя страница 22

Страница: 22 / 32

CVS4 Component Video Switch

Enable / Disable the IR control.

Enable / Disable the IR jack.

Enable / Disable appending Checksums or CRC-8’s to responses.

If enabled, choose whether Checksums or CRC-8’s will be appended to responses.

settings

Set the control bits to ‘settings’

XS +

settings

Set bits indicated in ‘settings’ to 1.

XS -

settings

Reset bits indicated in ‘settings’ to 0.

settings

Set the control bits to ‘settings’, save in EEPROM.

XS +

settings

Set bits indicated in ‘settings’ to 1, save in EEPROM.

XS -

settings

Reset bits indicated in ‘settings’ to 0, save in EEPROM.

XS ,1

Back up current settings into EEPROM.

XS ?

Query for current settings.

Response String:

=XS

settings

Where ‘settings’ is a bitmapped parameter:

Decimal Value

+128 +64 +32 +16 +8 +4 +2 +1

Bit Position

Name

0 CRC CSE IRJ IRS IRE FP AS

Factory Settings:

AS - 0=Master / Slave mode. 1=Asynchronous Mode.

KB - 0=Disable Front Panel.

1=Front Panel Enabled

IRE - 0=Disable IR remote.

1=Enable IR remote.

IRS - 0=Turn on IR Sensor.

1=Turn off IR Sensor.

IRJ - 0=Turn on IR Jack.

1=Turn off IR Jack.

CSE - 0=Disable CS and CRC-8 1=Append either Checksums or CRC-8 to responses.

CRC - 0=Append Checksums,

1=Append CRC-8’s, to reponses.

- Reserved, always set to 0.

The 2nd parameter is a “Backup Control Settings” flag. If it is non-zero, then the current settings

will be backed up in EEPROM, and will remain unchanged through a power failure. Backing up

the “

Control Settings

” will also backup the “

Extended Control Settings

”. If the second param-

eter is not given, then it is assumed to be 0.
The IR control (IR) and the IR jack (IJ), work differently when disabled. Disabling IR control, by

setting the ‘IR’ bit to zero, keeps the CVS4 from responding to IR codes, however the front panel

sensor remains operational and any codes received can still be queried for by using the “IR ?”

command. Disabling the IR jack, by setting the ‘IJ’ bit to zero, completely disables the IR jack. IR

commands are no longer be received through the IR jack if the ‘IJ’ bit has been set to zero.

•

CVS4 Command Reference

(Cont’d)

Содержание CVS4

































Результаты поиска

Содержание CVS4

Отзывы:

Бренды по названию

Популярные бренды

Zektor CVS4, Руководство пользователя

Результаты поиска

Содержание CVS4

Отзывы:

Бренды по названию

Популярные бренды