ZEITRAUM GmbH
•
Äußere Münchner Straße 2
•
D-82515 Wolfratshausen
•
Tel + 49 (0) 8171 – 418130
•
Fax + 49 (0) 8171 – 418141
•
•
www.zeitraum-moebel.de
MIUT /
Assembly Instructions 01/ 2017
ASSEMBLY
1.
Screw feet into the base of the bed:
•
for 100 cm – 120 cm width: 4 feet
•
for 140 cm – 160 cm width: 4 feet + 1 adjustable metal center-foot
•
for 180 cm – 200 cm width: 4 feet + 2 adjustable metal center-feet
Note: Always adjust the center-feet lower than the other feet!
2.
For widths of 180 cm or more:
The wooden feet have to be place at the head-side under the bed.
Then unfold the scissor mounts located underneath the frames and slide
the hooks into the opposite box spring frame and lock into place.
To release the connection, lift the frame with the hooks.
3.
Cover fabric:
Remove the fleece strip bit by bit and reattach the cover fabrics firmly to
the box spring frame, stretching the fabric from top to bottom. Ensure that the
zipper sits on head-side.
4.
Version with headboard:
Slide the headboard from above evenly and without tilting on
to the mounts of the boxspring frame.
CARE/CLEANING
The fabric covers of the bed frame and the headboard are removable.
When the fabric covers are removed, please place the provided fleece strip over
the exposed Velcro fasteners. This prevents the fasteners from snagging
while washing. To avoid potential shrinking of the fabric, please have the
covers professionally cleaned.
scissor mounts
metal center-foot
metal center-foot
MIUT BOARD
