GUEST
assembly instructions 07/2021
TOOLS:
Allen key SW4 and SW5 (encolsed)
10 x XS bolts
10 x connector housings
10 x grub screws
16 x confirmat screws 5x50
ZEITRAUM GmbH · Äußere Münchner Str.2 · D-82515 Wolfratshausen · Tel +49 (0)8171 - 418130 · Fax +49 (0)8171 - 418141 · [email protected] · www.zeitraum-moebel.de
Watch this video for further information on the metal fitting:
https://www.youtube.com/watch?v=ioIUTDqtvgE
1.
Screw XS bolts into foot and head ends and insert the connector housings
into the side rails. Align bolts and housings correctly!
Please assemble the bed
on a soft surface (e.g. a carpet or blanket)
to avoid damages.
2.
Join foot and head ends with the side rails. Fix the metal fittings with grub
screws.
3.
Screw XS bolts into the side supports and insert the connector housings
into the cross bar. Fit the cross bar between the side supports and tighten the
fittings.
4.
Fix the mattress frame with confirmat screws.
We recommend a 5 cm
overhang of the mattress. When two GUEST beds are in use, ensure to use
the supports at the same height.
5.
Insert the rubber caps into the holes in the mattress supports. Fit the sprung
slats into the rubber caps.
6.
The GUEST beds can be connected with two aluminium clamps. For this
purpose place the beds parallel to each other and join them with the clamps.
For non-use please store the clamps upright at the front end of the bed.
