ZEITRAUM GmbH · Äußere Münchner Str.2 · D-82515 Wolfratshausen · Tel +49 (0)8171 - 418130 · Fax +49 (0)8171 - 418141 · [email protected] · www.zeitraum-moebel.de
BONDT
ASSEMBLY INSTRUCTIONS 04/2011
REQUIRED TOOLS:
Hexagon key (included)
16 x XS Connector with
steel-dowel
box
grub
screw
Prior to assembly insert and turn steel-dowels into pieces A and
B. Insert the boxes into all the other planks, longitudinal slot must
parrallel to the long side of the plank.
ASSEMBLY OF THE FRAME
To
fi
x the connectors please use the grub screws. If you cannot
screw in the grub screw
fl
ushly, loosen connection and unscrew the
steeldowel slightly. Then connect again.
1. Connect plank E to plank A and
fi
x. Then connect plank C to A and
fi
x.
2. Connect plank F to plank B and
fi
x. Then connect plank D to B and
fi
x.
3. Cross and join the two mounted pieces.
4. Connect and
fi
x remaining parts A and B to frame.
Make sure to tighten all connections once more.
SCREWING THE TABLE TOP ON THE FRAME
Spread a blanket, put the table to upside down on the blanket.
Position the frame on the table top and
fi
x with enclosed pan-head
screws.
A
B
C
D
E
F
