ZEITRAUM GmbH · Äußere Münchner Str.2 · D-82515 Wolfratshausen · Tel +49 (0)8171 - 418130 · Fax +49 (0)8171 - 418141 · [email protected] · www.zeitraum-moebel.de
3°REGAL
Assembly Instruction 05/ 2015
enclosed:
- rubber allen key
- adjustable feet (glued-in)
- distance bar
- dowel + screw
- felt pads
required:
- drilling machine
1.
Determine the right position of the shelf.Keep
the wall-upright against the wall to mark the
position for the borehole. The wall-upright
is the one with the metal bed-fitting and the
notch for the skirting.
2.
Drill the hole and tighten the screw until just
8 mm of the screw are still visible. Place the
wall-upright with the bed fitting on the screw
head and push down until it stops.
3.
Align the wall-upright vertically and start to
hook the shelves into the upright from the
bottom to the top. Make sure that the correct
sides of the shelves are facing down (with the
3° angle), so that the shelves and the upright
fit well into place.
4.
Press down the shelves slightly. They cannot
slide off because they are wedged together
with the wall-upright.
Afterwards slide the right upright in the slots
of the shelves. Start again at the bottom
lifting the shelves a little bit.
video instructions: http://www.zeitraum-moebel.de/
3°
