
Page 7
All Rights Reserved. Zeitgeist LLC
8a. Open the front wheel quick release lever. Remove locknut and spring. Slide
quick release through axle, replace spring and locknut on shaft. Turn locknut only
a few turns so it’s loose for easy wheel installation.
8b. Gently insert the front wheel into the fork. Carefully slide the disc brake rotor
into the disc brake pads. Make sure the wheel is on fork as far as it will go.
Tighten the locknut, until the quick release fully tightens the axle onto the fork.
You want the quick release to close snugly, but you don’t want to over
tighten it.
You don’t want to have to “muscle” the quick release to close it, should close
firmly, but without excessive force.