Zeiss VISUREF 150, Руководство пользователя

Страница: 39 / 134

Initial start-up
000000-2227-967-GA-GB-281021
33
Connection to ZEISS VISUCONSULT/i.Com mobile
•
Connect the device to your network. To do this, plug the network cable
( 8 , Fig. 1) into the relevant socket ( 8 , Fig. 5).
•
Enable the interface in the Interface/Interface enablement menu (see
Section Interface submenu , page 95).
•
Open VISUCONSULT 500 and note the IP address of your i.Com server.
•
Open the Interface/LAN/Network socket menu ( see Interface
submenu , page 95).
•
Enter the IP address of your i.Com server into the "Peer address/ID" field.
•
Select "XML ZEISS" as output format and "i.Com mobile" as output
protocol (see Fig. 12).
Fig. 12 Settings for connection to ZEISS VISUCONSULT/i.Com mobile
•
Exit the device settings and tap Apply .
•
VISUREF 150 is now enabled to send data to ZEISS i.Com mobile or
VISUCONSULT 500.