Aktivieren des VIDEO-AUSGANGS
Sie können den Video-Ausgang anschalten, wenn
Sie anstelle des eingebauten Displays das Bild auf
einem Fernseher anschauen möchten. Schließen
Sie dazu das beiliegende AV-Kabel mit dem
schwarzen Stecker am Video-Ausgang des Kamera-
Okulars an. Den gelben Stecker verbinden Sie
dann mit dem entsprechenden Chinch-Eingang
Ihres Fernsehers.
Anschließend schalten Sie das Kamera-Okular an
und wählen die für Ihren Fernseher passende
Fernsehnorm aus (PAL oder NTSC).
Hinweis: Die Qualität des Fernsehbildes ist deutlich schlechter als das tatsächlich aufgenom-
mene Bild. Dies liegt an der geringen Auflösung des Fernsehbildes von 640 x 480 Bildpunkten.
Wählen Sie hierzu die Option [VIDEO-AUSGANG] aus.
Die Option wird erreicht über [HAUPTMENUE], [EINSTELLUNGEN].
Option
Funktion
[VIDEO OUT]
[AUS]
[PAL]
[NTSC]
Die Auswahl erfolgt jeweils mit den SCROLL-Tasten
oder
und wird
mit der OK-Taste gespeichert.
In Europa wählen Sie die PAL-Einstellung und in den USA die NTSC-Einstellung.
In der Einstellung AUS ist der Videoausgang deaktiviert und der eingebaute
Monitor angeschaltet.
Achtung
Bei aktiviertem Videoausgang schaltet der Monitor ab. Falls Sie den Video-Ausgang
versehentlich aktiviert haben, schalten Sie das Kamera-Okular einfach über den EIN-/AUS-
Schalter aus. Beim nächsten Einschalten wird wieder das eingebaute Display aktiviert.
604270_ZEISS GBH_02 Vict_DC4_S3–31_deu_pan.qxd4 / S. 21 /
Pantone Reflex Blue
/
Schwarz
21
Victory Kamera-Okular DC4
VIDEO OUT
AUS
PAL
NTSC
02 Vict_DC4_S3-31_deu_pan.qxd4 11.10.2006 9:30 Uhr Seite 21