Zeiss Stemi DV4, Руководство по эксплуатации

Страница: 31 / 38

OPERATION
Stemi DV4 / DR Core accessories Carl Zeiss
B 40-003 e 08/00 3-13
3.2.3.2 SONY camera "Digital Handycam
DCR-PC100"
•
Use the angled screwdriver to loosen the set
screw (3-16/
3 ) on the eyepiece adapter.
•
Pull out the lens mount (3-16/ 4 ).
•
Unscrew eyepiece (3-16/ 5 ) from one of the
eyepiece tubes.
•
Screw lens mount (3-16/ 4 , optical surface
pointing to the observer) onto the thread of the
eyepiece tube and tighten the screw until stop.
Caution! Do not touch the optics!
•
Screw sliding mount with thread M37 (3-16/ 2 )
into the M37 objective/filter thread of the DCR-
PC100 camera (3-16/
1 ) until stop.
•
Attach sliding mount with camera (3-16/ 1 , 2 ) to
the lens mount (3-16/ 4 ), orient it and use
angled screwdriver to tighten the set screw
(3-16/
3 ).
☞
The distance between the lower edge of the lens mount and the lower edge of the sliding
mount should measure 12 mm, i.e. the sliding mount should be attached to the lens mount
only until the marking ring.
•
Connect supply and signal cables, if required. If the camera will be used for a long period of time, it is
recommended to use the line adapter which is enclosed with the camera!
•
Switch on the camera.
•
Switch Autofocus to manual focusing (the symbols
F
, or are displayed).
•
Set camera lens manually to
∞
via the focusing ring: the symbol must be displayed.
Caution! It is possible that the "
∞
" setting is slightly moved when the adapter is manipulated or the
camera zoom operated. Therefore: always check the "
∞
" setting before taking exposures!
•
Move zoom camera lens into the center zoom position (display:
W T
).
•
Move camera lens into the "W" or "T" direction until the image is untrimmed and homogeneously
illuminated and until the required magnification has been reached.
•
The camera is ready for operation.
Fig. 3-16 Attachment of SONY camera
"Digital Handycam DCR-PC100"