Zeiss Stemi 305 cam, Руководство по эксплуатации

Страница: 14 / 134

ZEISS OPERATION OF THE INTEGRATED CAMERA WITH WI-FI Stereo microscope
Setting the WLAN mode (Wi-Fi) of the integrated camera Stemi 305 cam
12 435063-9144-008 06/2016
Engl
ish
Fig. 7 Safari browser of the iPad – selection of WLAN mode
•
Change over the Wifi mode to Connect to existing WLAN and acknowledge by pressing Next .
•
On the next screen click on the selection box next to WLAN and select the preferred Wifi Network.
Then enter it's password and confirm by pressing
Save
.
•
Take care for correct notation! After incorrect entry you might have to reset Stemi 305 cam (see
chapter 4.3) to get access to the integrated wifi camera again.
The blue status LED in the microscope body (see Fig. 3/
1
) will start flashing after a few seconds. About 1-
2 minutes later, the wifi mode is changed and the status LED is lit permanently again.
•
Close configuration page and Safari Browser.
•
By your choice, connect further "Stemi 305 cam" to the existing wifi network in the same way.
Subsequently select this net in the iPad settings and start Labscope/Matscope.
The live image of each connected microscope will appear as thumbnail (see Fig. 8).
Fig. 8 Live images of connected microscopes