Zeiss SL 120, Документация

Страница: 28 / 68

Installation
000000-1490-499-GA-GB-090118
22
Assembly of the SL 120 Slit Lamp
CAUTION - DANGER FROM FALLING PARTS
When selecting a suitable table, ensure that the combination of table and
instrument is stable up to an angle of tilt of 10°. Furthermore, the table
must be designed for 4 times the weight of the device configuration. If the
table is on castors, these must have a locking device.
Read the user manual of the instrument table and follow its instructions.
•
Place the slit lamp onto the chosen instrument table and fasten it by
means of two M4 screws (
2 , Fig. 7) to be screwed through the holes
( 1 , Fig. 7). Afterwards cover the screws with the provided plastic caps
( 3 , Fig. 7).
•
Check if binocular tube ( 5 , Fig. 7) is firmly mounted. Tighten up the
hexagon socket screw ( 6 , Fig. 7), if necessary.
•
Make sure that the eyepieces ( 4 , Fig. 7) have been plugged into the
binocular tube ( 5 , Fig. 7) as far as they will go.
•
Taking the cable length into consideration the power supply can be
placed anywhere, however it is best under the instrument table top.
•
Then connect the cables of the slit lamp and fixation lamp to the power
supply unit and, finally, connect the power cable of the power supply unit
to a standard socket with earthing contact. The cables have different
plugs to prevent misconnection.