Zeiss S100, Инструкция по эксплуатации

Страница: 14 / 278

Safety measures S100 / OPMI pico
Version 9.0
Page 14 G-30-1781-en

The connecting components have been properly connected. The screw
connections have been firmly tightened.

All cables and plugs are in perfect condition, i.e. without signs of wear,
kinks or other damage.

Determine the supply voltage at the place of installation and set the
voltage of the device accordingly.

The device is connected with the power cord supplied.

Check whether the device fuse used is the correct one as specified on the
fuse label.
Before every use
• When mounting accessory equipment, please make sure that the
admissible total weight of the surgical microscope is not exceeded.
(see "maximum load" label or the section "Technical data").
• When connecting accessories make sure that sufficient free space is
provided and that the surgical microscope does not touch the patient.
• Before every use, perform the balancing procedure to enable the surgical
microscope to maintain its balance in all positions of the working range.
• Check the surgical microscope for sufficient freedom of movement. The
device itself or accessories may be damaged if conflicting with each other.
WARNING The device must not be modified without any approval!
Do not modify the device without approval from the manufacturer.
If the device is modified, suitable inspections and testing must be carried out
to ensure that it can still be used safely.
The manufacturer is not liable for damages caused by an unauthorized use
of the device. Furthermore, such unauthorized modifications will render the
warranty and any claims under warranty invalid.
WARNING Danger! Electrical voltage!
• To avoid the risk of electrical shock, this device may only be connected
to a power supply network which is provided with a protective ground
conductor.