Zeiss S100/OPMI pico, Инструкция по эксплуатации

Страница: 14 / 278

Safety Measures S100 / OPMI pico
Version 7.0
Page 14 G-30-1781-en
Before every use
• When adding accessories and/or components, please ensure the permis-
sible total weight of the device is not exceeded (see label "Maximum load"
or section "Technical Data").
• When connecting accessories make sure that sufficient free space is pro-
vided and that the surgical microscope does not touch the patient.
• Before every use, perform the balancing procedure to enable the surgical
microscope to maintain its balance in all positions of the working range.
• Check the surgical microscope for sufficient freedom of movement. The
device itself or accessories may be damaged if conflicting with each other.
• To prevent accessories from falling down, check before every use that ac-
cessories are securely locked in position and securing screws are firmly
tightened.
• Always run cables in a manner that will not impede the user's movements.
• If you operate the device in a sterile area, make sure that you use the cor-
responding sterile accessories for the device.
• Make sure that the operating staff is briefed about sterile use of the sys-
tem.
• Never cover any ventilation openings, as the light source of the system
switches off in the event of overheating.
• Do not exert any force when plugging in electrical plug-in connections
(connectors, jacks). If connection is not readily possible, check whether
the plug fits the socket. If you detect any damage to the plug-in connec-
tion, arrange for the damage to be repaired by ZEISS Service.
• Please refer to the functional test in chapter "Operation" (Page 129).
More specific information about the floor stand:
• Using the brake tabs on the base, secure the stand in position. Make sure
that the stand is stable and cannot roll away.