ZEISS
3 Product and Functional Description | 3.2 Controls and Connections
1
2
Fig. 16: Connections and special components on the rear side of the reflected-light fluorescence
illuminator
1
RJ12 port
For power supply of the Primostar 3 HD
IP camera, if mounted additionally
2
RJ12 port
For power supply of the reflected-light
fluorescence illuminator
3.2.4 Primostar 3 HD IP Camera
Purpose
The Primostar 3 HD IP camera is used to visualize and transfer the microscopic image to an exter-
nal medium, such as a separate monitor, PC or tablet PC, via data line or Wi-Fi connection.
Position
The Primostar 3 HD IP camera can only be mounted on the stand without small handle lift.
2
3
1
Fig. 17: Controls of the Primostar 3 HD IP camera
1
LED indicator:
Shows the current camera working sta-
tus.
2
Reset
button:
Restarts the camera by continuously
pressing the button for 5 seconds using
a clip.
3
Snap
button:
Press briefly to trigger an exposure,
press and hold to start a video record-
ing, press briefly to stop a video record-
ing
The states of the Primostar 3 HD IP camera are displayed by LED indicator.
Instruction Manual ZEISS Primostar 3 | en-US | Rev. 1 | 415501-7011-111_en
27
