Zeiss OPMI VISU 160, Инструкция по эксплуатации

Страница: 172 / 234

172
Operation
G-30-1529-en OPMI® VISU 160 on S8, S81 & S88 Suspension Systems Issue 5.0
Printed on 09. 10. 2006
OPMI
®
: Selecting the magnetic brakes to be unlocked
You can define which magnetic brakes of the suspension system are to
be unlocked by turning the left and/or right handgrips (1) and (2) (turning
function).
In configuration mode 2, the upper display and key field (SELECT
BRAKES) permits you to select the following:
Selection
At each press of the "
∇
" or "
∆
" key, the program jumps from one possible
configuration to another.
Saving parameter settings
As soon as you have entered a parameter setting, it is saved under the
current user ID.
Caution:
Be extremely careful when changing these settings. You should change
settings only under your own user ID. Notify all users of any changes, or
make sure that each user only works under his own user ID.
XY - Z The magnetic brakes of the suspension system for X-Y move-
ment and Z movement can be unlocked separately. For this
purpose, you must turn the left handgrip (1) or the right handgrip
(2) to the left or right.
• To release the magnetic brakes for X-Y movement only:
Turn the left handgrip (1).
• To release the magnetic brakes for Z movement only:
Turn the right handgrip (2).
• To release all magnetic brakes, i.e. to release the magnetic
brakes of the suspension system for XY and Z motion:
Turn the left handgrip (1)
and the right handgrip (2) at the
same time.
ALL All magnetic brakes are always unlocked, i.e. the suspension
system's magnetic brakes are unlocked for X-Y and Z move-
ment, irrespective of whether you turn the left handgrip (1) or the
right handgrip (2).
Path: The basic mode is automatically displayed after the instrument has
been switched on.
To access configuration mode 2 from the basic mode, go via con-
figuration mode 1.
For this, simultaneously press the "MODE" and "STORE" keys
twice in succession:
1. Jump from the basic mode to configuration mode 1
2. Jump from configuration mode 1 to configuration mode 2.
1 2
Configuration
mode 2
MODE
STORE MANUAL
SELECT
BRAKES:
ALL