Zeiss OPMI VISU 160, Инструкция по эксплуатации

Страница: 120 / 234

120
Description
G-30-1529-en OPMI® VISU 160 on S8, S81 & S88 Suspension Systems Issue 5.0
Printed on 09. 10. 2006
Foot control panel (option)
Intended use
The foot control panel permits you to control 14 different functions of a
suspension system or surgical microscope, provided these functions are
part of your configuration (suspension system, surgical microscope). The
assignment of the functions to the controls of the foot control panel is
shown on the next page.
Design
The foot control panel is equipped with two rocker switches (1) for con-
trolling the ”zoom” and ”focus” functions. The up/down movements of
these functions are located on the same side, allowing you to control the
two directions by toe/heel movement, without having to shift your foot.
Bridge (3) between two rocker switches (1) serves as a support to rest
your foot on.
Connector (2) is used to connect the foot control panel to the connector
of a suspension system or wall-mounted control panel.
The foot control panel is enclosed in a water-tight rubber case.