Zeiss OPMI Vario, Инструкция по эксплуатации

Страница: 112 / 264

112
Description
G-30-1607-en OPMI® VARIO on S8, S81 & S88 Suspension Systems Issue 5.0
Printed on 30. 01. 2009
Power switch, connector and socket (option)
The connector and socket can be either installed in the OR, or they can
be integrated in the ceiling mount, at the back of the carrier arm (see illus-
tration).
1 Rail
The delivery package contains a cable clip which is used to guide the
cable of the foot control panel away from the operating table. The
cable clip can be easily attached to rail (1) either on the left or right
side of the arm.
2 Power switch
When the suspension system is on, the green indicator light in the
switch is lit.
3 Connector for control component (option)
Here, a foot control panel can be connected.
4 Socket for control component (option)
If the ceiling mount is installed on a ceiling track mount, you can use
a foot control panel to move the ceiling mount to its working position
or standby position.
5 Remote socket
for triggering an AUX signal, e.g. to switch on/off an external device
operating at max. 24V/0.5A.