Zeiss OPMI PROergo S7, Инструкция по эксплуатации

Страница: 121 / 268

Version 11.0
G-30-1435-en
Page 121
S7 / OPMI PROergo Device overview
Focus menu
You can adjust the settings for the following functions in the Focus menu:
Zoom Link:
The Zoom Link function lets you couple the focusing speed to the current
magnification. This means that the focusing speed is automatically reduced
when a high magnification is used. Whether the Zoom Link function has been
activated or deactivated is stored in the respective user profile.
Speed:
The focusing speed from minimum to maximum speed from 5% to 100% in
increments of 5%.
Start at:
focus start value. Adjust the working distance at which the focusing system
should start when you call your user profile. The setting can be adjusted and
saved within a range of 200 to 415 mm in increments of 1 mm.
The value shown in the graphic display is not a measuring function. It is only
intended as an aid for orientation and may not be used as a measurement
value.
• Activate the function desired and move the indicator bar using one of the
arrow buttons (
, ) until the reading required is displayed in the field
at the top.
• Press the Enter button to save the value set and to return to the Surgery
menu. If you do not press any button, the display will automatically
jump back to the Surgery menu after approx. 30 seconds and save the
values set.
Focus
50 %
300 mm
On
On
On
On