Zeiss OPMI Lumera i, Инструкция по эксплуатации

Страница: 2 / 184

OPMI Lumera i
Version 8.0
Page 2 G-30-1720-en
About This Manual These Instructions for Use are part of the delivery scope.
• Please read them carefully before using the device.
• Keep them at the site of use of the device.
• Store them for the entire service life of the device.
• Pass them on to any subsequent owner or user of the device.
Help with orientation – At the beginning of these Instructions for Use there is a summary of the
different sections; this provides an overview of all the the topics.
– The contents of each chapter are specified in detail at the beginning of
each chapter.
– A list of abbreviations, key words, and technical terms in the annex
facilitates the search for specific terms.
Scope These Instructions for Use apply to the OPMI Lumera i with the following
identification:
– Reference number: 6633
– Software Release 1.5
Trademark OPMI, OPMI Lumera, Inverter tube, CALLISTO eye, HaMode SCI (Stereo Coaxial
Illumination), MindStream, and EDIS are trademarks or registered trademarks
of Carl Zeiss Meditec AG or another company of the ZEISS group in Germany
and/or other countries.
Manufacturer's details
Subject to changes in design and scope of delivery, as well as ongoing technical
development. Printed in Germany.
Copyright
© Carl Zeiss Meditec AG 2018
All rights reserved. Reprints and reproductions, in whole or in part, are prohibited.
However, these Instructions for Use may be digitized and archived for internal
use. Access to this data by third parties is not permissible and must be prevented.
Carl Zeiss Meditec AG
Goeschwitzer Strasse 51-52
07745 Jena
Germany
Fax: + 49 (0) 7364 - 20 4823
E-mail: surgical@meditec.zeiss.com
Internet: www.zeiss.com/med