Zeiss OPMI Lumera i, Инструкция по эксплуатации

Страница: 12 / 184

Safety measures OPMI Lumera i
Version 8.0
Page 12 G-30-1720-en
Please note that local legislation takes priority over the requirements of the
above-mentioned standards. If you have any questions, contact your local
dealer or ZEISS Service.
• Never use force when trying to connect any electrical connectors (plugs,
sockets). If connection is not readily possible, check whether the plug fits
the socket. If any of the connectors are damaged, have the Carl Zeiss
service team repair them.
• When mounting accessory equipment, please make sure that the admissible
total weight of the surgical microscope is not exceeded. (See label “Maximum
load” or chapter “Technical data”).
• When mounting non-Zeiss equipment, make sure that sufficient free
space is available for focus positioning.
Requirements to be met by the user
The device may be operated only by personnel who are properly instructed
and trained.
The operator must ensure that the personnel working with the system possess
the necessary qualifications and training.
• Keep the Instructions for Use available at all times for the operating
personnel.
• Modifications and repairs on this device or any ZEISS equipment operated
together with this device may only be performed by ZEISS Service.
Liability and warranty
The warranty and liability depend on the contractually specified conditions.
Loss of warranty
The manufacturer is not liable for damages caused by an unauthorized use of
the device. Furthermore, such unauthorized modifications will render the
warranty and any claims under warranty invalid.