Zeiss LSM 880, Руководство по эксплуатации

Страница: 59 / 690

CHAPTER 1 - SYSTEM OPERATION
LSM 880 Left Tool Area and Hardware Control Tools ZEISS
10/2014 V_01 000000-2071-464 53
These microscope functions can also be operated directly on the microscope stand via
assigned buttons or through the touch screen, if available. In that case, any changes are
recorded by the software and displayed in the relevant windows / panels.
For left side port access, the reflector has to be in a None position.
If the reflected light lamp is equipped with a software controlled shutter, the
Shutter On/Off button in
the
Fluorescence
field should be in the
On
position in order to open the shutter. In
Shutter Off
mode,
the shutter is closed and will block the light.
5.1.1 Microscope Control Tool for Axio
Observer.Z1
To have access to the microscope functions to
define a configuration, you have to expand the
Microscope Control tool by pressing the
expansion symbol in the Microscope Control tool
tab (Fig. 47).
The
Microscope Control panel contains the
following functions:
HAL On/Off button for transmitted light: If the
button is pressed, the control panel appears
(Fig. 48).
If you press the
On
button it will be highlighted
and the Halogen lamp will be switched on
(symbolized by the halo in the lamp symbol).
In parallel the shutter for transmitted light
automatically opens (
On position in the Light
control
field and
Open
position in the
Ocular
panel). The light intensity of the HAL lamp can be
varied via the input box or slider.
The light path will be highlighted by color in the
diagram. Press the
On
button again to shut down
the light. The button will go to the Off position
and the shutter closes automatically.
The color temperature for photo documentation
can be switched on via the
3200 K button.
Fig. 47 Microscope Control tool
Fig. 48 Microscope Control tool – HAL lamp
control