Zeiss LSM 880, Руководство по эксплуатации

Страница: 469 / 690

CHAPTER 1 - SYSTEM OPERATION
LSM 880 Center Screen Area / Image Containers - Display and Image Analysis ZEISS
10/2014 V_01 000000-2071-464 463
6.9.9 Series
The Series tab (Fig. 654) displays the Render
Series control panel. This panel allows settings for
the axis to be used for rotation of the 3D
reconstructed images. This feature is applicable to
all render modes available in 3D VisArt.
There are four different modes for producing
render series (see Fig. 656).
Depending on the activated mode, directly set the
parameters for animation in the
Render Series
window and the position of the 3D image in the
Image Display window (zoom, rotation axes,
rendering parameters).
Click on
Apply to start the animation
The animation is performed in a separate
Image
Display window, which permits the animation to
be saved afterwards.
(1) Turn around X and Turn around Y mode
In this mode, the image is turned around the X-axis or the Y-axis exclusively.
The values for
Number of Views
,
Difference Angle
and
First Angle
can be selected accordingly).
(2) Start and End mode
In the Start and End mode, the image is recon-
structed between a start position and an end
position.
The rotation angles for X, Y and Z and the distance
(zoom) can be determined using the sliders.
The value for
Total frames can be varied. The
frames are distributed equally between the start
and end points (Fig. 657).
Fig. 654 Series tab
Fig. 655 Render Series window
(e.g. Turn around X mode)
Fig. 656 Render Series modes
Fig. 657 Start panel in the Render View
control block