Zeiss LSM 880, Руководство по эксплуатации

Страница: 291 / 690

CHAPTER 1 - SYSTEM OPERATION
LSM 880 Left Tool Area and Hardware Control Tools ZEISS
10/2014 V_01 000000-2071-464 285
The context menu of the
Fit deviation
diagram
(Fig. 380) can be used to reset the zoom to its
original value, copy the data, and adjust the
display.
•
Click on the diagram with the
right
mouse
button. The Fit deviation context menu opens.
•
Click on the line Reset Diagram Zoom with
the left mouse button to reset the zoom to its
original value.
•
Select the line Scaling to open the Diagram
scaling window (Fig. 381). Enter the required
percentage value (from 1 to 100) for the scaling
and click on
OK to rescale, Cancel to keep the
old value. The scaling of the G(t) axis will be
adjusted.
•
Select the line Copy data to clipboard with a
click of the mouse if you want to insert the data
directly into other WINDOWS programs via the
clipboard. The Paste function permits direct
insertion of these data into the required
program.
•
Select
Write to file
to store the data in an
external ASCII file (.txt).
(2) Fit table
The Fit Table displays the values of the fitted parameters and will be updated after pressing the Fit tab.
All the
Fit table
functions in the
FCS Fit
mode are identical to those in the
Fit
application.
Measuring rows in the Result table can be activated / deactivated by checking / unchecking the
corresponding check boxes. Deactivation of these check boxes will not exclude the relevant rows from all
subsequent evaluation procedures, but only from the average. Average curves are updated in respect to
the rows taken into consideration.
Fig. 380 Context menu of the Fit Deviation
diagram
Fig. 381 Scaling menu