Changing t he M ount of a ZEISS LWZ.3
In this chapter you learn how to change the mount of a ZEISS LWZ.3. The procedure consist of
2 parts which are both mandatory to successfully change a mount. You learn how to detach the
currently attached mount and how to attach a diĴ erent mount. To make sure the ZEISSLWZ.3
works properly, additionally complete the subsequent procedure:
Adjusting a ZEISS LWZ.3 to Your Digital Camera.
Det aching a M ount
You need
ZEISS LWZ.3
ZEISS T6 torque wrench with a torque of 0.4 Nm
alternatively: regular T6 torque wrench with a torque of 0.4 Nm
ZEISS T3 torque wrench with a torque of 0.05 Nm
alternatively: regular T3 torque wrench with a torque of 0.05 Nm
ZEISS Interchangeable Mount Set for ZEISS LWZ.3
The use of tools oĴ ered by ZEISS is highly recommended. You can purchase these tools directly from ZEISS
or your trusted ZEISS dealer. See
Mount Change Accessories
Requirement s
Ensure that your working space is ı at and leveled, in order to prevent the lens from tilting and falling over.
Ensure that the environment is clean and free from dust so that no dust particles enter the ZEISS LWZ.3.
Ensure that the front lens cap sits on your ZEISS LWZ.3, in order to avoid scratches.
