Zeiss Lightsheet Z.1, Руководство по эксплуатации

Страница: 241 / 427

CHAPTER 4 - SYSTEM OPERATION
Lightsheet Z.1 Left Tool Area and Hardware Control Tools Carl Zeiss
02/2013 000000-1790-528 71
3.2.11.1 Interval Time
Expand the Interval field by clicking the triangle
(Fig. 99). An
Interval Time
is a potential time
interval between the end of one cycle and the
beginning of the next cycle. The time and time unit
for the interval time is set using the slider or input
box of
Interval Time
.
A total of six different interval times can be defined
by adding additional lines by clicking on the
+
button.
Clicking the – button deletes the currently
highlighted interval time.
The interval time can be changed while imaging manually by highlighting the interval time in the list of
the
Interval field. A change of interval time will be indicated by a blue marker in the time series (see also
section
3.2.11.2 Marker
).
You can load a predefined timer configuration from the Interval Time field by pressing the Load button
(symbolized by the folder icon) (Fig. 100).
All saved timer will be listed in the
Load configuration…
panel (Fig. 101). Select the appropriate one by
highlighting it in the Recent section, which lists the recently used timer configurations or from the
Configurations
section where all saved timer configurations are displayed. To search for a timer
configuration, type in its name or part of its name into the Search field and only those timer
configurations will be listed that contain the typed in string of letters.
To delete a timer configuration, press the
Delete button (symbolized by the trash can icon).
This opens the Delete configuration… window (Fig. 102).
Fig. 99 Time Series tool – Interval Time
Fig. 100 Interval Time
Fig. 101 Load configuration… panel
Fig. 102 Delete configuration… panel