Zeiss Lightsheet Z.1, Руководство по эксплуатации

Страница: 228 / 427

CHAPTER 4 - SYSTEM OPERATION
Carl Zeiss Left Tool Area and Hardware Control Tools Lightsheet Z.1
58 000000-1790-528 02/2013
If the triangle of the
Look Up Table (LUT)
drop
down menu is pressed, a color can be assigned to
a channel by highlighting it (Fig. 79).
The
Range Indicator
is used to easily visualize
black and white pixels. This display mode shows
white regions in red and black regions in blue.
Some red and some blue pixels should be visible to
ensure the signal is spread over the dynamic range
of the detector and no image information is lost.
The scroll bar allows access to all predefined colors.
By pressing the
upwards pointing open arrow ,
the highlighted track will move one position up in
the displayed track array (Fig. 80).
Likewise, by pressing the
downwards pointing
open arrow
, it will move one position down. The
arrows are only active, if an upward or download
movement is possible.
You can add up to 4 tracks by pressing the
+
button. You can delete tracks by highlighting them
and pressing the
trash can button.
You can load a predefined track configuration as a
profile in the position of the highlighted track from
the
Track Configuration
field (only available in
the Show all mode) by pressing the Load button
(symbolized by the
folder
icon) (Fig. 81).
Fig. 79 Track LUT drop down menu
Fig. 80 Track selection display – Track 2 moved
to the top, no further upward
movement is possible
Fig. 81 Track configuration