Zeiss INTRABEAM, Инструкция по эксплуатации

Страница: 13 / 82

Version 6.2
G-30-1767-en
Page 13
INTRABEAM Water Phantom Safety measures
• Modifications and repairs of this device or any equipment operated to-
gether with this device may only be performed by ZEISS SERVICE or other
specialists authorized by Carl Zeiss.
Required additional
information
These Instructions for Use (G-30-1767) titled "INTRABEAM Water Phantom"
contain detailed explanations on use of the water phantom and information
on the functions of the INTRABEAM which are relevant for the water
phantom.
For further explanations on the use your INTRABEAM, please refer to the re-
spective instructions for use or the product information attached to your
INTRABEAM and its accessories.
• Read through the following Instructions for Use thoroughly before using
the INTRABEAM Water Phantom:
– If you have an INTRABEAM 600:
ZEISS Instructions for Use "INTRABEAM 600" G-30-1987
– UNIDOS Romeo Electrometer Type TN10053-AS
Manufacturer: PTW-Freiburg
Instructions for Use: D970.131.01
– "INTRABEAM Spherical Applicators"
ZEISS Instructions for Use: G-30-1478
– "INTRABEAM Surface Applicator Set"
ZEISS Instructions for Use: G-30-1856
– "INTRABEAM Flat Applicator Set"
ZEISS Instructions for Use: G-30-1880
Requirements for
the user
The INTRABEAM (INTRABEAM 600) may only be used by qualified specialists
who have been trained in the operation of the INTRABEAM. Other persons are
prohibited from operating or using the INTRABEAM.
Every facility that operates an INTRABEAM must appoint suitable and qualified
specialists who have been trained in operation of the INTRABEAM and are re-
sponsible for the tasks associated with the INTRABEAM.
The manufacturer, Carl Zeiss Meditec AG, offers training courses on the
INTRABEAM (INTRABEAM 600).