Zeiss Humphrey II-i series, Руководство пользователя

Страница: 125 / 580

Humphrey Field Analyzer II-
i
series User Manual 2660021145640 A
Testing 5-15
The Test Complete Screen
The following buttons are displayed on the Test Complete screen:
Save On Disk or Save /Transmit
You may save the test result with these buttons. It allows you to save a test (and transmit) more than
once. This is important if you are saving to more than one USB storage device at the end of a test,
for example. This button will also allow you to save a test if you previously had decided not to save
it. This may have happened if you pressed the NO button shown in
Figure 5.5 or Figure 5.6 .
Display Status
This button is available so that you can verify the parameter settings of the completed test.

Test Other Eye
This choice switches to the Start of Test screen for the other eye. All current test parameters remain
in effect.
Zoom
This button is provided at the end of Full Field Screening tests to better display points in the central
30 degrees on the screen. Press ZOOM a second time to expand back to full field size.
Print
To get a printout of the results immediately following a test (or during a pause for partial results),
select the
PRINT FUNCTIONS icon button. This takes you to the Printout Selection screen that is
illustrated in Figure 5.7 .
The top of the Printout Selection screen shows the current test(s). If you selected the PRINT
FUNCTIONS
icon button before the second eye was tested, or if you intentionally tested only one
eye, then only a single test will appear. If test results for both eyes are available, the printouts may
be printed at the same time. There are different printout selections for screening and threshold tests.
The two available screening print formats are Screening Test, which prints each test on a separate
page, and Both Eyes (or OU), which condenses the two test results to one page. There are several
threshold print formats including Single Field Analysis (with or without GPA), Overview, Change
Analysis, Three-in-One, GPA Summary, Full GPA, and GPA Last Three Follow-up. Only the
Three-in-One is a non-STATPAC format. Refer to
“STATPAC Analysis & Printing,” on page 7-1 for a
detailed description of each print format and for printing instructions.
You do not have to print results from the Test Complete screen immediately following a test. By saving
test results to disk, you have the ability to print at any time it is convenient by using the
PRINT
FUNCTIONS icon button. You also can print the test results of the last right and left eye tested by
using RECALL LAST TEST on the Main Menu screen (provided that the instrument was not turned off
in the meanwhile). The Test Complete screen will display when viewing a test via RECALL LAST TEST.