UMSTELLEN UND TRANSPORT
Bodenstativ S
Transport über weite Strecken
ZEISS
01/2017
435413-7144-010
21
D
eu
tsch
•
Den Federarm (Bild 7/
1
) in die Transport-
position schwenken.
•
Klemmschrauben und Klemmhebel (Bild 3/
3
,
5
,
10
,
12
,
14
und
15
) feststellen, um die
Bewegung von Traverse, Federgelenkarm,
Neigekopf und Mikroskop zu arretieren.
•
Alle Feststeller (Bild 7/
3
) der Rollen lösen.
•
Das Bodenstativ S an der Stativsäule an der
markierten Position (Bild 7/
2
) anfassen und es
vorsichtig
zum gewünschten Standort
schieben und dort in Position bringen. Dabei
stets darauf achten, dass das Gerät auf
ebenem Untergrund steht.
•
Vor erneuter Inbetriebnahme mindestens
zwei der Feststeller (Bild 7/
3
) drücken und
prüfen, ob sich das Stativ nicht mehr unbeab-
sichtigt in Bewegung setzen kann.
Das Bodenstativ S langsam und vor-
sichtig transportieren. Kollisionen ver-
meiden.
Bei einer Kollision mit anderen
Geräten kann das Bodenstativ S be-
schädigt werden, Teile können herab-
fallen und dabei Personen verletzen.
Nach Kollisionen mit anderen Geräten
muss es vom ZEISS-Service überprüft
und ggf. instandgesetzt werden.
5.2
Transport über weite Strecken
•
Das Gerät über weite Strecken (z. B. Umzug, Rücksendung zur Reparatur, usw.) nur in der Original-
verpackung oder einer speziellen Rücksendeverpackung transportieren.
•
Wenden Sie sich hierzu an Ihren Händler oder an den ZEISS-Service.
Bild 7
Transportposition des Federarmes