Zeiss FixAssist XTR, Руководство по эксплуатации

Страница: 11 / 19

Operation
11 626109-9160-000 FixAssist XTR Operating manual V1.0
4 Operation
Assembling probe systems requires a very high degree of precision. For
this reason, you should always work with extreme care when configuring
your desired probe system.

Faults during assembly have a direct impact on your measurement results.
Always use a stainless steel extension when bolting down extensions or
probes to hold them in place.
Fig. 4: Extension as counter support
NOTE:
If possible do not use your original probe for configuring your probe
system. Use old probes with a large sphere diameter for configuration,
and your original probe exclusively for your measurements.