Zeiss EXTARO 300, Инструкция по эксплуатации

Страница: 49 / 60

Instructions for Use Technical specification
Ambient requirements for operation
Designation Value
Temperature + 10°C ... + 40°C
Rel. humidity 30% ... 75%
Air pressure 700 hPa ... 1060 hPa
Ambient requirements for transport and storage
Designation Value
Temperature - 40°C ... + 70°C
Rel. humidity (without condensation) 10% ... 90%
Air pressure 500 hPa ... 1060 hPa
Wireless communication
11.7.1 Wi-Fi router information
•
Release version of firmware: V1.2
•
Frequency band(s): 2.4G:2.412 – 2.472 GHz
•
RF Output Power:
 802.11b: 19.75 dBm (EIRP)
 802.11g: 19.85 dBm (EIRP)
 802.11n 20MHz: 19.95 dBm (EIRP)
 802.11n 40MHz: 19.75 dBm (EIRP)
•
Antenna type: Dipole Antenna
•
Antenna gain: 2.0 dBi
•
Maximum radio-frequency power transmitted: 20 dBm ± 2.0 dBm
•
Operation modes: Duplex
•
Modulation Type: DSSS/OFDM
11.7.2 Statement of Class B digital device (Part 15 of the FCC Rules)
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
−
Reorient or relocate the receiving antenna.
305935-3500-000 – 2.1 – 2017-12-15
48 / 59