Zeiss EVO, Инструкция по эксплуатации, Страница: 109 / 180

ZEISS 5 First Operating Steps | 5.8 Switching Off the Microscope System
Procedure
1. Click the All: button in the Status Bar .
2. Select Shutdown Gun from the pop-up menu.
3. Exit the SmartSEM user interface. Refer to Closing the SmartSEM User Interface [
}
109] .
4. Close all programs and software.
5. Select
Windows start button > Power icon > Shut down .
6. At the front of the plinth, press the STANDBY button.
à The microscope switches to Standby mode.
7. Only when interrupting work for longer periods: Press the OFF button.
à
The microscope switches to OFF mode.
à
The electron column is partially vented.
à
Computer, electronic components, and vacuum system are switched off.
à
A 24 V auxiliary voltage is still present to
restart the microscope.
5.8.3 Closing the SmartSEM User Interface
5.8.3.1 Logging off from the SmartSEM User Interface
Procedure 1. From the Menu Bar , select File > Log Off .
à
A system message is displayed.
2. Click Yes .
3. Close the EM Server .
à A system message is displayed.
4. Click Yes .
INFO: The EM server remains active.
5.8.3.2 Closing the SmartSEM User Interface
Procedure 1. From the Menu Bar , select File > Exit .
à
A system message is displayed.
2. Click Yes .
3. Close the EM Server .
à A system message is displayed.
4. Click Yes .
Instruction Manual ZEISS EVO | en-US | Rev. 10 | 354706-0780-006 109