![background image](http://html1.mh-extra.com/html/zeiss/elyra-7/elyra-7_operating-manual_3332235099.webp)
ELYRA 7
Left Tool Area and Hardware Control Tools
ZEISS
03/2019 V_02
000000-2262-999
95
The
Info
window pops up (Fig. 133).
Press
Yes
to delete the configuration,
No
to keep
the configuration.
To save a configuration press the
Save
button
(symbolized by the
disc
icon).
This opens the
Save current Track configuration
as
panel (Fig. 134).
Type in an appropriate name in the
Configuration
field and press
Ok
to save the configuration in the
data base or press
Cancel
to abort the process.
The name of the track can only be changed when
saving the track (Fig. 135).
If a highlighted track is saved with a certain name
or a predefined track with a name is loaded into a
highlighted track, the new name will appear in the
Tracks
designation box automatically.
Track designation in the
Imaging Setup
tool will
automatically be updated (Fig. 136).
The total set of parameters for one or multiple
tracks can be stored as an acquisition configuration
using the save option in the
Experiment
Manager
field of the
Acquisition
panel.
Using multiple tracks is the preferred method to
clearly separate weakly overlapping emission
signals.
Fig. 133
Delete information window
Fig. 134
Save Current Track configuration as
window
Fig. 135
Track selection display – Tracks
renamed
Fig. 136
Imaging Setup tool Tracks display–
Tracks renamed updated from the
Channel tool