![background image](http://html1.mh-extra.com/html/zeiss/elyra-7/elyra-7_operating-manual_3332235211.webp)
ELYRA 7
Left Tool Area and Hardware Control Tools
ZEISS
03/2019 V_02
000000-2262-999
207
5.3.18.2
SIM – Modulation contrast
Modulation Contrast
is a diagnostic tool to check
on the modulation contrast of the system. Modulation
Contrast is meaningful only for a Z-Stack of raw SIM
data acquired with preferentially sub-resolution
beads.
Select the
Modulation Contrast
tab to (Fig. 344).
Pressing the
Default
button will save the present
parameter values as default. By pressing
Reuse
, the
currently saved parameter values will be loaded.
With the
Channel
selection
drop down menu you
can choose
All
channels or the channel you want to
process if the image has more than 1 channel
). The Channel selection drop down menu is
only available for multi-channel images, otherwise it is
not displayed.
There are different filters that can be set by
corresponding sliders or spin input boxes to select the
(sub-resolution) beads.
Feature size
:
Feature size
sets the mask size that is
used to cut out the bead. The extensions are
displayed in the
Preview
tab of the image container
as circles (Fig. 346).
Fig. 343
SIM Tools – Modulation Contrast
Fig. 344
SIM tools – Modulation contrast
Fig. 345
Channel selection drop don menu