![background image](http://html1.mh-extra.com/html/zeiss/elyra-7/elyra-7_operating-manual_3332235162.webp)
ZEISS
Left Tool Area and Hardware Control Tools
ELYRA 7
158
000000-2262-999
03/2019 V_02
Batch
•
For batch processing press the
Run Batch
button
(Fig. 256) and select the respective directory and
files from the file selection window which opens at
the top.
•
After confirming your selection the batch
processing will start and might take a few minutes
to hours depending on the number and type of
files selected.
All files will be processed with the same processing
strength and with the same mode: 2D or 3D. Do not
mix the modes for processing as this will stop the
processing (if 3D is chosen for 2D sets) or only do a
2D processing (if 2D is chosen for 3D data sets).
Processing can be stopped clicking
Stop Batch
.
The status of processing (% of progress/batch
finished) is displayed in the Batch panel which appears
in the Method tool once a batch process has been
started.
Fig. 256
Airyscan Processing tool:
Method Parameters, Run Batch