Zeiss DuraMax, Руководство по установке

Страница: 14 / 22

DuraMax Installation site requirements
14
Footprint/ sample installation/ weights
DuraMax without base
1803
200
60
670
1080
835
1170
1360
230

Front and side view/ M 1:30/ dimensions in millimeters
For the installation of DuraMax, you can also use a sturdy table

as a base. It should be at least 700 mm high and
must be designed to bear a load of ≥450 kg. (Provided by customer).
Other dimensions (e.g. distance to the wall) and required connections can be seen in the drawing on the next page.
Weight Value
CMM [kg] 350
Workpiece, max. [kg] 100
Floor load
Mean pressure on the support surfaces.
Please check the corresponding support surfaces.
Warning for a CMM on a table
If the CMM is on a table, the CMM can slip and fall off.
WARNING
There is a risk of injury if the CMM falls off due to vibrations.
Crushing of body parts
Irreparable damage to the CMM.
— Provide suitable anti-slip protection (e.g. a collar mounted around the storage surface or depres-
sions in which the CMM feet can be placed).