Zeiss CONTURA, Руководство по эксплуатации

Страница: 137 / 158

Care
61211-1310402 CONTURA
9-7
Inspection measures:
Object Interval Type of care
Stylus system At least every week Lint-free cloth; use a
cleaning agent if re-
quired
➤
See [
⇨
9-12]
Filter mat for ventilation of
the controller box Quarterly – Clean by beating and
vacuuming
– Replace the filter if re-
quired
➤
See [
⇨
9-12]
Filters for compressed air As required Check
➤
See [
⇨
9-13]
Care and cleaning
Measuring table
The contact surfaces of the workpiece or the clamping device and the
measuring table must be clean. Any particles beneath the contact sur-
face may lead to inaccurate measurements. Moreover, the surfaces of
the measuring table and of the workpiece may be damaged.
CAUTION
Risk of injury when a workpiece falls down due to an oily sub-
stance.
Crushing of feet and abrasions on legs.
ü
There must be no lubricating film on the measuring table and the
workpiece.
—
Remove any greasy or oily substances from the measuring table and
the workpiece.
1. Remove large particles with a vacuum cleaner.
2. Then clean the measuring table with a mild cleaning agent.
NOTE
Make sure that no cleaning agent residues remain on the measuring ta-
ble.