Zeiss Compact Prime CP.3 XD, Быстрое руководство

Страница: 14 / 31

13
Read or record ZEISS eXtended Data on the MasterLockit Plus
In order to record ZEISS eXtended Data the MasterLockit Plus must be setup correctly:

Camera, MasterLockit Plus and lens are connected according to your camera setup

Camera is up and running

MasterLockit Plus is up and running
Connect the MasterLockit Plus to a computer
While no connection to the computer is needed during the shot, it makes sense to use the web interface of the
MasterLockit
Plus during setup to ensure that all parameters are correct.
via WiFi
The WiFi dongle must be connected to one of the MasterLockit Plus ´s USB ports.

Open your network settings and search for WiFi Access Points.

Connect to the access point which name (SSID) begins with “mlp-”.

Type in the password. The password is identical to the name of the access point (mlp-…).
via Ethernet

Connect the Ethernet cable to your MasterLockit Plus .

Connect the Ethernet cable to your Computer or Laptop.
Access the MasterLockit Plus web interface

Open a web browser (we recommend Google Chrome).

Type in 10.0.0.1 OR masterlockit.local in the address bar.
In case the web interface does not appear, verify that the MasterLockit
Plus is properly connected to your computer
via WiFi or Ethernet.
Synchronize MasterLockit Plus and camera
While the MasterLockit Plus records the ZEISS eXtended Data continuously, it is important to ensure that the
timecode and the Frame Rate are setup correctly and synchronized with the camera.
For ARRI and RED cameras: To set the timecode in your camera, connect your camera with the timecode cable with
the MasterLockit
Plus . Go to the timecode settings in your camera menu and chose the following settings:
ARRI cameras:

TC

Options
Source: Ext LTC
Mode: Free Run
Generator: Regen
RED cameras:

Menu

Settings

Project

Frame Rate
Project Time Base: select your Frame Rate, for example 23,98 FPS

Menu

Settings

Project

Timecode
TC Display Mode: TOD
Source: External