Zeiss Colibri 7, Руководство по эксплуатации

Страница: 30 / 34

OPERATION
ZEISS Controlling the Colibri 7 solid-state light source Colibri 7
30 423052-7344-001 02/2017
Image acquisition in the "Gated" mode
Gated
allows the direct control of LEDs via the
trigger output of the camera.
The active LED will be switched on or off with the
adjusted brightness in parallel to camera exposure.
All relevant shutters will be automatically
controlled by ZEN.
The bleaching impact on the probe will be reduced
by synchronizing the exposure time of Colibri 7
with that of the camera.
In an experiment, the
Gated mode is typically
faster than the
Continuous
mode.
• Connect the trigger output of the camera using
the trigger cable (accessory for Axiocam, order
number 426557-0001-000, see operating
manual Axiocam) with the
Increment outlet
socket on Colibri 7 (see (Fig. 4/ 1 ).
• In the
Acquisition
tab, expand the
Acquisition
mode
tool by clicking on the expander (see
Fig. 20).
• Activate the checkboxes
Enable for Snap
and
Enable for Live in Trigger Control -> Trigger
Out
.
• Activate the Gated mode in the Colibri 7
control menu.
• Activate LEDs by clicking the corresponding
checkbox and set the desired brightness.
• Use the Live , Continuous or Snap buttons to
acquire images.
Fig. 20 "Acquisition" tab – "Acquisition
mode" tool